Difference between revisions of "SmartHCM Webservice Release Notes 2.4.0.0"

From SmartHCM Wiki
Jump to navigation Jump to search
Line 14: Line 14:
  
 
*<u>'''General - General'''</u>: '''Default Value''': A new end-point has been created to get the new Parameters defined in the "System Default" screen (SmartHCM): 1. "UPLOAD_UTILITY_STATUS" (Default value "Yes"). 2. "UPLOAD_MACHINE_STATUS" (Default value "No"). 3. "UTILITY_STATUS_UPLOAD_INTERVAL" (in "Minutes"). 4. "MACHINE_STATUS_UPLOAD_INTERVAL" (in "Minutes").
 
*<u>'''General - General'''</u>: '''Default Value''': A new end-point has been created to get the new Parameters defined in the "System Default" screen (SmartHCM): 1. "UPLOAD_UTILITY_STATUS" (Default value "Yes"). 2. "UPLOAD_MACHINE_STATUS" (Default value "No"). 3. "UTILITY_STATUS_UPLOAD_INTERVAL" (in "Minutes"). 4. "MACHINE_STATUS_UPLOAD_INTERVAL" (in "Minutes").
−
 
−
*<u>'''General - General'''</u>: '''Machine(s) History''': A new end-point has been created for saving the Machine(s) History status in the Database.
 
  
 
*<u>'''General - General'''</u>: '''Utility Machine(s)''': A new end-point has been created for saving the Machine(s) Configuration in the Database.
 
*<u>'''General - General'''</u>: '''Utility Machine(s)''': A new end-point has been created for saving the Machine(s) Configuration in the Database.
Line 25: Line 23:
 
*<u>'''General - General'''</u>: '''Machine(s) Log''': A new end-point has been created to save the Machine(s) Log in the Database while Utility shows "Success" or "Failure" message on the application.
 
*<u>'''General - General'''</u>: '''Machine(s) Log''': A new end-point has been created to save the Machine(s) Log in the Database while Utility shows "Success" or "Failure" message on the application.
  
−
*<u>'''General - General'''</u>: *Utility History*: A new endpoint has been created for saving Utility status history in the database.
+
*<u>'''General - General'''</u>: '''Login''': A new end-point has been created for Login verification, which also requires entering the "MAC Address" and "Computer Name" in the Database.
−
 
 
−
*<u>'''General - General'''</u>: "Login": An endpoint has been created for login verification, which also requires entering the MAC address.
 
  
−
*<u>'''General - General'''</u>: *Machine Log*: The newly created endpoint has been called to save machine logs (success/failure) in the database.
 
  
−
*<u>'''General - General'''</u>: A new endpoint named "GetOutsideAllowDedPay_SecurityCode" has been provided to show only the "Outside Allowances" and "Outside Deductions" in this new endpoint. The data has been displayed in the same way as it is displayed in the existing "Salary_getPayslip_SecurityCode" endpoint. Additionally, the same parameters have been used in the new endpoint as those used in the existing "Salary_getPayslip_SecurityCode" endpoint.
+
*<u>'''General - General'''</u>: A new end-point named "GetOutsideAllowDedPay_SecurityCode" has been created to show only the "Outside Allowances" and "Outside Deductions" in this new end-point. The data has been displayed in the same way as it is displayed in the existing "Salary_getPayslip_SecurityCode" endpoint. Additionally, the same parameters have been used in the new endpoint as those used in the existing "Salary_getPayslip_SecurityCode" endpoint.

Revision as of 13:36, 28 November 2024

SmartHCM Webservice 2.4.0.0 Release

Release Date: 15-Nov-2024

Module Version: 2.4.0.0 MP33

Maturity Status: QA Approved

Enhancements

  • General - General: Restore Machine(s): A new end-point has been created for restoring the Machine(s) Configuration from the Database to the Utility.
  • General - General: Machine(s) History: A new end-point has been created and called for saving the Machine(s) History status using the "MACHINE_STATUS_UPLOAD_INTERVAL" parameter only when the "UPLOAD_MACHINE_STATUS" parameter is set to "Yes" in the "System Default" screen (SmartHCM).
  • General - General: Utility Service Status: A new end-point has been created for entering the Utility Service Change History status in the Database.
  • General - General: Default Value: A new end-point has been created to get the new Parameters defined in the "System Default" screen (SmartHCM): 1. "UPLOAD_UTILITY_STATUS" (Default value "Yes"). 2. "UPLOAD_MACHINE_STATUS" (Default value "No"). 3. "UTILITY_STATUS_UPLOAD_INTERVAL" (in "Minutes"). 4. "MACHINE_STATUS_UPLOAD_INTERVAL" (in "Minutes").
  • General - General: Utility Machine(s): A new end-point has been created for saving the Machine(s) Configuration in the Database.
  • General - General: Utility History: A new end-point has been created and called for saving the Utility History status using the "UTILITY_STATUS_UPLOAD_INTERVAL" parameter only when the "UPLOAD_UTILITY_STATUS" parameter is set to "Yes" in the "System Default" screen (SmartHCM).
  • General - General: Machine(s) Data Fetching Detail: A new end-point has been created and called each time the Windows Service runs for the Machine(s) to save the "Last Run Successfully" and the "Last Fetched Date/Time" in the Database.
  • General - General: Machine(s) Log: A new end-point has been created to save the Machine(s) Log in the Database while Utility shows "Success" or "Failure" message on the application.
  • General - General: Login: A new end-point has been created for Login verification, which also requires entering the "MAC Address" and "Computer Name" in the Database.


  • General - General: A new end-point named "GetOutsideAllowDedPay_SecurityCode" has been created to show only the "Outside Allowances" and "Outside Deductions" in this new end-point. The data has been displayed in the same way as it is displayed in the existing "Salary_getPayslip_SecurityCode" endpoint. Additionally, the same parameters have been used in the new endpoint as those used in the existing "Salary_getPayslip_SecurityCode" endpoint.
Retrieved from "https://wiki.smarthcm.com/index.php?title=SmartHCM_Webservice_Release_Notes_2.4.0.0&oldid=12167"